MEET LIFT CONTROL GATEWAY

The elevator control gateway is a device between the building intercom system and the elevator control system. There are 5 modes defined in the elevator control system:

• The owner calls the elevator to go up
• The owner calls the elevator to go down
• The owner enables the apartment in which he resides for visits
• The owner opens the door when he receives a plate call.
• It asks for the status of the elevator and shows it on the screen. This device has 6 LEDs on the cover. It can display the command information and the STATUS + APARTMENT OF THE HOMEOWNER. If applicable, the ref. F01616 10 OUTPUT RELAY DECODER, must be configured in the first instance. Each of the NO/NC relays of the F01616 decoder is assigned to a floor, and this information must be recorded in an Excel file. Special software will be used to upload this information to the gateway.

Elevator control function compatible with digital panels; Not compatible with 1-line Milo boards

Consumption:

• At rest: 60mA
• Operating: 110mA

Operating voltage:

• 12 Vdc

Funcionament condition:

• Temperature: -40 oC – 55 oC
• Humidity: 10 – 93% (No condensation)

Dimensions :

• 145×90×45mm