TIMER

‹ Go back
TIMER

Reference: 29001

Allows a device to be activated for a given time (programmable from 0 to 6 min, or from 0 to 60 sec.). Activation can be done automatically or by means of a specific push button on the telephone or monitor.

Ask for more information

Description

The timer has the following connections and controls:
  • PDT relay to activate the external device (C, No, Nc).
  • Potentiometers to adjust the activation time: Minute adjusted potentiometer (P1) and Second adjusted potentiometer (P2).
  • Timed Activation Button Connection (S,-): activates the timer relay during the programmed time.
  • Button connection for Reset (R,-); Allows the timer to be deactivated before the programmed time has elapsed.
  • Direct Activation Button Connection (Ab ,-): activates the timer relay when the button connected here is pressed.
  • Connection for call activation (I1, I2): allows the calling wire and the negative from the outdoor panel be connected (4+N systems) and activate the time when making a call.

Technical specifications

  • Power: 9~14 Vac;11~18 Vdc
  • Consumption:
    • With 12 Vdc power supply: 20 mA idle, 50 mA active.
    • With 12 Vac power supply: 50 mA idle, 110 mA active.
  • Maximum output values:
    • Power (resistive load): 1250VA or 150W
    • Voltage (resistive load): 125 Vdc, 380 Vac.
  • Maximum temperature: 0~+65ºC
  • Timing:
    • P1: from 0 to 6 minutes approximately.
    • P2: from 1 to 60 seconds approximately.
  • Activation by call:
    • Electronic call: 4Vpp~18Vpp.
    • Alternate call: 4Vac~12Vac.

Technology: GENERICA

Weight: 0.073 kg

Measures of the packed product: 9x6,5x2,5 cm

EAN 13: 8424299290010

Technical datasheet

Handbooks

Documentation